Here are my my still frames breaking down the backhand deceptive crosscourt length flick. I wore the tape so it would be easier to track my joints and the angle and the velocity that they moved during the swing.
Phase 1) The Start/Preparation
Phase 2) The Backswing
Phase 3) Top of Swing/Transitioning Phase
Phase 5) Downswing
Phase 6) Point of Rapid Acceleration
Phase 7) Contact Point
Phase 8) Follow Through
Phase 9) The Finish
For those that are interested in the biomechanics, here is a chart of what is important during each phase of the swing.
Description
of Backhand Deceptive Flick Crosscourt Drive
There are a number of essential elements required for an expert
performance of a backhand deceptive crosscourt from the front left
position of the court. The following are the most crucial components
for expert performance.
1. 'Disguise/Deception': The first and most crucial element
for effective performance is having a shot body/postural setup that
is identical to a straight drive. This means that the performers hips
should be perpendicular to the front wall. The shoulders and the feet
must also be perpendicular to the front wall, which is how a person
would set up to execute a traditional straight drive. If this
criteria is not met it is unlikely that the opponent will be
expecting a straight drive (and less likely to be deceived). The
following mechanical factors are required for effective execution of
a deceptive backhand crosscourt flick.
2. 'Power Load' – timing of the heal-toe step and elbow
(hyper)flexion: Besides the postural setup, the synchronicity of
the downswing, and the transition stage is an important element for
deception. If the swing starts too early the opponent can read that
the racquet will contact the ball too far to the right of the athlete
and too far in front of their front foot which reveals that the shot
will be hit crosscourt. So just having a proper postural setup is not
sufficient for effective deception. One particular stage of this
timing sequence appears to be interconnected. This is the heal-toe
step of the right (front) foot and the commencement of the wrist
flexion and elbow extension. These are closely linked in time and are
the most immediate motions prior to the onset of the racquet
downswing. The close connection between the two allow for the
effective buildup (torque) and transfer of force along the
biomechanical kinetic link. The front foot heal touches the floor
first and as the toe follows suit the elbow and shoulder of the
racquet arm begin their final bit of rotation before starting to
unwind into the downswing.
3. 'Shoulder Torque': Another important element for successful
deception is the relative angle of the racquet-hand shoulder from the
transitioning downswing through the downswing and to the contact
point. Just prior to the downswing the medial rotation of the
shoulder is fully rotated to provide maximum torque. Early and
excessive lateral rotation of the shoulder(s) will reveal your true
shot intention and timing. This has a lot to do with the angle of the
step the athlete takes stepping into their shot. If the direction of
the lead foot step is towards the front wall (versus the side wall)
it will once again be more obvious what the true intention of the
shot will be before it has been hit. The shoulder torque is an
important part of producing the torque required for generating
maximal amount of force and should not be what determines the
location of the shot execution. It is the wrist and elbow extension
acceleration that makes the shot deceptive.
4. 'Level-Headed': The position and lack of rotation of the
neck and head are also vital for successful performance. The head
begins higher, but as the performer steps into and lowers their
centre of gravity, the head lowers but remains parallel to the floor
through the downswing and contact of the ball. The head also rotates
laterally slowly through the shot. The head gives a general frame of
reference to where the athlete is looking and focusing their
attention. In a traditional crosscourt by an amateur player, the head
and neck will open up towards the front wall, towards the direction
of the shot. In an expert performance of the deceptive backhand
crosscourt, the forehead and neck remain perpendicular to the front
wall through the downswing and the contact point. Because the head is
a revealing postural cue for shot selection it is important to
eliminate lateral rotation. The head and neck can also be used in
facilitating deceptive shots, for examples in 'head-fakes' when
rotating the neck in one direction while hitting it to another.
5. 'Rapid Wrist Acceleration: The Snap': None of the
previous elements are sufficient on their own for successful
performance unless the athlete can generate a wrist acceleration
during the downswing to make the racquet head to increase in velocity
to hit the ball in front of their lead foot. This rapid acceleration
of the wrist is done through extension and supination. This requires
a lot of strength in the wrist and forearm, especially if the ball is
cold. From a traditional perspective, this rapid acceleration is done
after the onset of the downswing and because of the this the
beginning of the shot looks as though it will be hit straight down
the wall. The flick crosscourt still needs to be struck with a
sufficient amount of pace and accuracy to be effective. This wrist
extension increases the angular velocity of the swing and means that
the ball is hit with the wrist extended. The end result of a
successful performance in the shot being struck slightly ahead of the
lead foot with an angled racquet face striking the ball crosscourt.
'Other/Tactical Implications': The position of the performer
on the court and the time allowed to execute the setup and shot will
influence the effectiveness of the shot. So the successful execution
of this skill not only requires the proper sequencing and timing, but
also an understanding of when to play this shot and how much time is
required to execute the skill effectively.
Here is a checklist for each phase. I've listed what is critical to coupling your regular backhand straight drive and deceptive backhand crosscourt drive.
Checklist is in Phases:
- Similar set up to straight drive through the backswing and transition phase
- Racquet position/preparation
- Length of the backswing
- Relative squash ball location to the body
- Length (distance) and angle of front foot step
- An appropriate amount of spinal and core rotation (too much will make it difficult to time the crosscourt flick effectively)
- Through the downswing and rapid acceleration phase
- Wide and and lowered base of support (and centre of gravity)
- Dragging the back toes
- Delayed wrist extension acceleration
- The point where the wrist accelerates and the amount of change in angular velocity
- Elbow extension
- The head should be positioned beyond the right knee (through contact as well)
- Avoid early lateral rotation of the head and neck
- Through the Contact Phase
- Maintaining flexion in the right knee through contact
- Snap: rapid wrist extension must occur to increase the velocity of the swing so the racquet face is angled appropriately for a crosscourt. Meaning that the wrist must be in extension at the point of contact so the racquet head is not parallel to the forearm.
- To maintain balance the left arm swings back opposite to the racquet arm with a low centre of gravity and a wide base of support
- The height and angle of the right arm plus the amount of flexion of the lead knee at contact is an effective method for determining how close or far the performer is to the ball. If the ball is too close the performer will not be able to show a straight drive, while if the ball is too far from the body the person will not be able to hit the ball crosscourt
- The (closing) grip on the racquet can influence the range of motion of the wrist extension
- Follow Through
- Limiting the follow through of the arms to finish parallel to the side wall
- Maintenance of balance and recovery back to the 'T'
- Time and space of shot and position of the opponent on the court
Below is a list of the priorities for being able to execute these the two shots: (tactical
and technical)
- Ability to hit regular backhand straight drives and crosscourt drives
- Time allowed to execute skill
- Similarity to straight drive (the following will change depending on individual difference in straight drive techniques
- Wrist in extension and supination at contact point (hitting the ball with the racquet head slightly ahead of the hand)
- Increased wrist angular velocity and displacement during downswing
- Avoid rotating head/neck during downswing or contact
- Shoulders and hips have to be parallel to side wall
- Large base of support and maintenance of balance through swing
- Distance of contact point relative to the body (angle of right arm/shoulder, height of hand and knee flexion are effective measurement and comparison tools)
- Impulse at the contact point (velocity of receiving ball and racquet head)
- Wide stance and balance of support throughout downswing, contact and the follow through
- Non-dominant arm and back foot dragging to maintain balance through the downswing, contact and the follow through
- Length and timing of backswing relative to ball location (compact swing is more deceptive but will have less power)
- Limiting the arms (and shoulder rotation) follow through to finish parallel to the side wall
I have a lot more info where this came from. I also have some slow motion videos from this, but they were too large to upload to my blog. If I can compress them somehow I will upload them at another time. I hope that this was interesting to some of you and gets you thinking about the physiology and biomechanics involved in not just these two shots, but in squash.
Nice Pictures!
ReplyDeleteaSDFGH
ReplyDelete